1 877 524 8100
The AIU-900 series are a pre-assembled autopilot interface unit following the interconnect specifications and component requirements recommended by the manufacturers of certain PFD systems when interfaced with existing 1C388 series autopilot couplers. It is intended to provide a convenient solution in a single device with multiple variations for installers to use in place of producing the same circuits from discrete components as specific in PFD installation manuals.
The AIU-900 series standard features:
EFD1000PRO PFD to Century 1C388 series autopilot couplers
G500 PFD to Century 1C388 series autopilot couplers
Small size
D-Sub connector
Easily mounted
AIU-900B for use with Aspen PFDs
Supports 1C388 / 1C388M / 1C388-2 / 1C388-3
Equipment Required but not supplied:
1 each 25 pin Male D-Sub connector
1 each SPC15461 Hood or equivalent
each 2063 Screw locking hardware kit or equivalent
or
1 each AIU-900IK Installation Kit
Dimensions:
4.6 x 2.56 x 1.5 inches (including 25 pin connector)
Weight:
.38 lb
Case Material:
5052H32 Aluminum Chassis and Cover
Connectors:
25 Pin Female D-Sub Connector
Mounting:
Bulkhead, Four 8/32 Screws
Input Specifications:
Input Voltage:
Not Applicable
Current:
Not Applicable
Component List AIU-900B
Capacitors:
0.027uF, 0.047uF Metalized Polyester, 100V
Inductor, Choke:
18 mH, 27mH
Resistors:
1.0 kOhm, 100.0 kOhm 0.25W, 1%
Trim Pots:
5 kOhm, 200 kOhm Single Turn, Side Adj
Transformers: TY-141P (x1), TY-145P (x2)