TE CONNECTIVITY
BUTT SPLICE/Red, maximum temperature: +135 degrees Celsius. Length: 27.94 mm. Sold in bags of 100.
Part #:
D-436-36 Manufacturer part #:
650074-000
Unit Quantity:
100.00
Min. Order Qty:
100.00
0.24
MAP:
0.00
1 877 524 8100
These D-436 MiniSeal crimp splices are immersion-resistant, in-line tin-plated sealed crimp splices and developed for applications with temperature ranges up to 150°C. These crimp splices are small, light, and environmentally resistant and meet SAE-AS81824/1 requirements.
Part D-436-36 is red and has a 2.16 mm (min) inside diameter for use with 26-20 AWG gauge wire.
- Provides an immersion-resistant in-line splice on 1:1 wires for wire ranges from 26 AWG to 12 AWG, tin-plated conductors, and insulation rated for at least 135°C
- Meets SAE-AS81824/1 requirements
- Small size and light weight
- Provides insulation and strain relief
- Easy installation
Splice Type:
Butt splice
Butt splice
Insulation Material:
Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride
Crimp Barrel:
tin-plated copper
Meltable Inserts:
Meltable thermoplastic
Barrel Inside Diameter:
2.16 mm (0.085 in)
Wire Size:
26 - 20 AWG
304 - 1,510 CMA
0.12 - 0.6 mm2
Maximum Number of Wires:
side 1: 2
side 2: 2
Operating Temperature:
150°C max.
Temperature Rating:
-55°C to 150°C (-67°F to 302°F)
Voltage Drop:
6.9mV at 4.5A vs 8.1mV for an equal length of wire
Tensile Strength:
exceeds strength of the conductor
Dielectric Strength:
2.5kV
Insulati