North American Avionics

CALL US NOW: 1 877 524 8100

ACR ELECTRONICS INC. / ARTEX

ELT SYSTEM/ELT 345 Base Pack/406 MHz with GPS interface/includes whip antenna, remote switch, install hardware, buzzer and connector

Part #:
8102
Manufacturer part #: 
8102
Unit Quantity: 
1.00
Min. Order Qty: 
0.00
4.10
To order, contact us now
MAP: 
0.00

1 877 524 8100

[email protected]

 
The ARTEX ELT 345 is a 406 MHz ELT that provides exceptional value at an extremely competitive price. This unit can be activated manually (via the cockpit remote switch or ELT switch) or automatically (the G-switch senses a 2.3 G or greater impact). Once activated, the ELT 345 transmits a 406 MHz signal with the beacon's registration information and embedded GPS coordinates to the closest search and rescue agency via the Cospas-Sarsat satellite system. The beacon also transmits a 121.5 MHz homing signal to help search and rescue pinpoint the aircraft/ELT location. This unit is designed for fast, flexible installation as either a new install or as a retrofit with options like a two-wire remote switch that does not draw aircraft power. The ELT 345 is a single-output ELT, using the same RF output and only one coax cable to transmit both 406 MHz and 121.5 MHz signals. The unit's built-in navigational interface does not require aircraft power to operateâwhich results in lower install costsâand the stainless steel mounting bracket supplied with the unit has a multiple hole mounting pattern to accommodate legacy footprints.
  • Automatic fixed (AF) emergency locator transmitter with manual or automatic activation using a hermetically sealed G-switch
  • Single antenna output for 406 MHz and 121.5 MHz
  • Provides position accuracy to within 100 meters through a built-in GPS interface (NMEA 0183 or RS 232)
  • ELT and installation can be tested using a satellite-based online confirmation test via ARTEX's proprietary satellite testing service at 406Test.com
  • 2-wire interface does not require aircraft power
  • Worldwide coverage
  • Weight (with tray): 2 lb (907.19 g)
  • Dimensions (transmitter with mounting hardware installed): 6.40 x 2.96 x 3.78 in (16.26 x 7.52 x 9.60 cm)
  • Cospas-Sarsat, FAA TSO approvals

This ELT 345 includes a stainless steel mounting bracket with a multiple hole pattern configuration for retrofitting legacy ARTEX ELTs as well as ACK, Kannad or AmeriKing ELTs.

 
 
Weight (with tray):
2 lb (907.19 g)
 

Dimensions (transmitter with mounting hardware installed):
6.40 x 2.96 x 3.78 in (16.26 x 7.52 x 9.60 cm)

 

Operating Frequencies:
121.5 MHz ±6.075 kHz (Emission Designator 3K20A3X)
406.040 MHz ±1 kHz (Emission Designator 16K0G1D)
Depending on Cospas-Sarsat TAC

 

Output Power:
406 MHz: 5W for 24 hours @ -20°C to 55°C (-4°F to 121°F)
121.5 MHz: 50 mW for 50 hours @ -20°C to 55°C (-4°F to 131°F)

 

Output Connector:
BNC female

 

Activation:
automatic by 4.5 ft/s (2.3 G ) primary G-Switch and manual activation

 

Battery:
6-year Lithium LiMnO2

 

Temperature Certified to:
Operating: -20°C to 55°C (-4°F to 131°F)
Storage: -55°C to 85°C (-67°F to 85°F)

 

Self-test Checks: