1 877 524 8100
The IFR 4000 NAV/COMM Test Set Flight Line and Ramp Test Set is designed to test ILS, VOR, marker beacon, HF/VHF/UFH/ communications (Nav/Comm) systems. With an optional ELT software upgrade, the IFR-4000 can test 121.5/243 MHz short range emergency beacons as well as 406 MHz COSPAS/SARSAT long range emergency beacons. The IFR 4000 has been engineered for portability, reliability, and easy-of-use. It can also be use for bench testing for general aviation.
This NAV/COMM test set operates from an internal battery when used in the field but may also operate from the provided AC/DC power adapter for bench testing, servicing and battery charging.
Test Set Includes:
- Antenna, 75MHz
- Antenna, telescoping
- Transit case
- Operation Manual (CD)
- Getting Started Manual
- AC/DC power supply
- Power cord, 110V
- Power cord set, 220V
- TNC (male) to TNC (male) coaxial cable
- TNC (female) shorting cap
- Spare fuse
- 50 Ω load
Features:
- Accurate measurements of VHF/UHF transmitter frequency, output power, modulation (AM and FM) and receiver sensitivity
- Accurate measurements of HF transmitter frequency, output power, modulation (AM) and SSB USB/LSB receiver sensitivity
- Generation of ARINC 596 selective calling tones
- Accurate measurement of VHF/UHF antenna and or feeder SWR (standing wave ratio)
- Simulation of localizer and glideslope (CAT I, II and III) signals with variable DDM settings
- Swept localizer DDM for coupled auto pilot testing (simultaneous localizer, glideslope and marker signals)
- Simulation of VOR beacon with variable bearing
- Simulation of marker beacon, selectable airways (Z), outer and middle marker tones
- Guided test capability allows instrument setup steps to be stored
- Optional ELT upgrade provides accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power and modulation (AM), audio output for headphones to monitor swept tone, as well as accurate measurement of 406 MHz COSPAS/SARSAT beacon transmitter frequency and output power. Decodes and displays all location and user protocols
- Large, LCD display with user adjustable backlight and contrast
- Internal battery provides eight hours of operation
- Automatic power shutdown after approximately 5 to 20 minutes (selectable) when operating on internal battery
- Compact and lightweight allows for one-person operation
Weight:
<8 lb (3.6 kg), test set only
Dimensions:
11.2 x 9.1 x 2.7 in (28.5 x 23.1 x 6.9 cm)
Altitude:
≤4800 meters (test set)
≤3000 meter (with supplied external AC/DC converter)
Operating Temperature:
-4°F to 131°F (-20°C to 55°C)
Storage Temperature:
131°F to 158°F (-30°C to 70°C)
Input Power:
11 VDC — 32 VDC
100 VAC — 250 VAC @ 1.5A (maximum), 47 Hz — 63 Hz (with external AC/DC converter)
Power Consumption:
55 watt, maximum
16 watt (nominal) @ 18 VDC with charged battery
Fuse Requirements:
5A, 32 VDC (type F)
Main Supply Voltage Fluctuations:
≤10% of nominal voltage
Transient Over-Voltage:
According to installation category II
Input/Output Connectors:
RF I/O Connector:
Type: input/output
Impedance: 50Ω, typical
Maximum input level: 30 watt for 1 min. ON/2 min. OFF
VSWR: 10 MHz to ≤300 MHz: <1.3:1 / >300 MHz to 400 MHz: <1.35:1
Antenna Connector:
Type: input/output
Impedance: 50Ω, typical
Maximum input level: 0.5 watt
SWR Connector:
Type: output
impedance: 50Ω, typical
Maximum reverse power: +25 dBm
VSWR: 10 MHz to ≤300 MHz, <1.3:1 / >300 to 400 MHz: <1.35:1
AUX connector:
Type: input/output
Impedance: 800Ω, typical
Maximum input level: 5 Vp-p
Timebase (TCXO):
Temperature stability: ±1 ppm
Aging: ±1 ppm per year
Accuracy: ±1 ppm when Auto Cal is performed
Battery:
Type: Li-Ion / with 8+ hr of continuous operation