ACR ELECTRONICS INC. / ARTEX
ELT TEST SET/for use with ARTEX ELTs
Part #:
8701 Manufacturer part #:
8701
Unit Quantity:
1.00
Min. Order Qty:
0.00
2.20
To order, contact us now
MAP:
0.00
1 877 524 8100
This 406 MHz ETS ELT test set allows technicians to easily verify a beaconâs ID after installation or reprogramming. The ETS ELT test set is a rugged, waterproof handheld device that can read the beacon ID transmitted from an Artex 406 MHz ELT. The beacon ID and its encoded data is displayed on the display and saved and timestamped to an internal database. The beacon can be read over the air (in test mode or in a shielded enclosure), or by transmitting directly into the reader for beacons with external antenna connections.
- Records all data to a internal database where it can then be backed up to a PC
- Data can be viewed on the PC independent of the ELT test set
- Prints records directly to a serial or infrared (IrDA) enabled printer
- Low cost infrared adapters available to turn any printer with a parallel port interface into an infrared printer
Weight:
1 lb (456 g)
1 lb (456 g)
Dimensions:
6.7 x 3.7 x 1.53 in
406.025 receiver range:
-60 dBm to 36 dBm
Decoding:
Per Cospas-Sarsat C/S T.001
Operating System:
Windows CE 5.0/Garnet OS 5.4
Microprocessor:
400 MHz Samsung
Memory:
volatile; 64 MB SDRAM
non-volatile; 128 MB flash
expansion: via MZIO⢠bus standard
Display:
LCD; TFT high brightness touch screen
resolution; 240 x 320 pixels
viewable area; 3.5 in
backlight; LED
Communications:
USB; 1 MB/sec
serial (RS232); 1,200 to 11,500 bits/sec
infrared (IrDA); 1,200 to 11,500 bits/sec @ 1 meter
Communications Connector:
13-pin with custom gold plated pins
Battery:
type; lithium io